doodle waving, lots of bright colored yarns, DIY for tweens and teens

If I experienced to select just one artwork medium for the rest of my existence it would be fibers. I am often drawn to them, even from an early age when I only wanted to dress in corduroy trousers for the reason that I could operate my fingers throughout the grooves and make a neat audio. My aim as an artwork key in school was textile design, and in my creative profession more than the past 30 years I have started off a children’t outfits organization, a quilting corporation, and there isn’t 1 wall in this dwelling that doesn’t have a person of my homemade fabric banners (wait right up until you see my following article!). I am indicating all this to convey to you that I lastly tried doodle weaving and I want to do nothing else all working day every single working day!!

doodle waving, lots of bright colored yarns, DIY for tweens and teens

The finest portion is that there are definitely no issues to be made… just experimentation and colour exploration. And you hardly need any supplies, and there is no mess, and you can take them on a trip, and young children as young as 4 can make them way too. So a lot of explanations to tends to make a single! Do you want to give it a consider? Okay, great. Enable me demonstrate you how it’s carried out.

Supplies Essential for Doodle Weavings:

~ Piece of cardboard for the loom (mine is 10.5″ X 6.5″)

~ Scissors

~ X-acto knife

~ Yarn in different weights and colours

~ Plastic lacing needle or masking tape

~ Adhere

~ Fork (for pushing down the weft so it suits snuggly jointly without having gaps)

Make a cardboard loom for weaving with kids

How to Make a Doodle Weaving:

1. Initial, make the cardboard loom.

Action 1: Lower a rectangular piece of cardboard, I happened to presently have a piece that was 6.5 inches extensive and I minimize the duration to 10.5 inches.

Move 2: Fold the ends up about 3/4 of an inch. You will have to have to “score” the back again with an X-acto knife and then bend it up. This implies you slash a shallow line at the stage in which you want to bend it on the opposite facet to support bend in a straight line.

Stage 3: Lower an even sum of slits with scissors on possibly end for the warp (that’s the stationery yarns that go up and down). I created 16 slits since I desired my warp to be limited. But if you are applying a large amount of hefty, thick yarn or carrying out this with compact kids then perhaps you want to do 12 slits. You can see these rainbow weavings that we did in artwork camp for a loom with 12 warp threads.

Make a cardboard loom for weaving with kids, attaching the warp

2. Connect the warp.

Action 1: Minimize just one warp yarn for every single two slits. I slice 8 quite long items. Each individual yarn must loop about the prime and cling down at the base to create the fringe.

Phase 2: Double-knot the top rated close to the stick, earlier mentioned the loom, then push the yarn into the slits.

Action 3: Push the other close of the yarn into the bottom slits and then pull so the stress is not much too unfastened and not to restricted, but generating absolutely sure tension is equivalent with all warp threads.

Phase 4: Tie knots at the bottom to produce the fringe. Do not trim the fringe nonetheless, wait around to do that at the finish.

Making a cardboard loom to weave with kids

3. Start out your weaving.

Move 1: Opt for your weft colours (the yarns that go across) and decide on 1 color to begin. If you have a needle, fantastic. If not (I could not come across mine) you can tape the close of the yarn like a shoelace which allows weave via the warp.

Step 2: Beginning at the base, weave a handful of rows just straight across. If you have never ever finished weaving before, take a seem my weaving with young children publish which clarifies in element how to weave. It’s essentially just about and below, then again throughout in the reverse in excess of-beneath pattern. It is not tough, but it can be quick to drop a warp thread or overlook to improve sample on the way back. So following every single operate as a result of, use your fork to press down the weft and eyeball that factors look great. And try to remember to be mindful not to pull the yarn far too tightly on either side. This will distort the weaving. Youthful young ones do this most of the time, but you can educate them to enjoy out for that.

Doodle weaving on a cardboard loom with colorful yarns

Stage 3: Right after you have a couple rows on the bottom, you can get started “doodling” with distinctive yarns. Commence any place and just generate a condition. I was loosely pondering of mountains when I created this which aided in my doodling.

Doodle weaving on a cardboard loom with colorful yarns

Phase 4: When you’re completely ready for the up coming color, just start up coming to the final color, even if you are setting up in the middle. To avoid gaps in the weaving, make positive that the upcoming shade is woven over some of the identical warp yarns that the last colour utilised. But if you do locate that there are gaps at the finish, you can also just go back and fill them. This is doodling, so just about anything goes!

Doodle weaving on a cardboard loom with colorful yarns

Phase 5: Test some other varieties of weaves. I do not know what this is identified as (below is a glossary of distinctive weaves if you are intrigued) but I just created it up and it seemed interesting and attention-grabbing. I like mixing puffy, thick yarn with thinner yarns. For me, the color is as significant as the texture.

Doodle weaving on a cardboard loom with colorful yarns

Doodle weaving on a cardboard loom with colorful yarns

Doodle weaving with a cardboard loom and colorful yarns

Recall, every single time you begin or close a new color, go away a tail. You can even depart the tape on the close due to the fact you can use it afterwards to end the back.

A finished doodle weaving on a stick, the ends still need to be tucked in

Move 6. When you get to the prime, weave a handful of straight rows to finish. Carefully pop the warp yarns off of the loom. You will discover that there is a very little further area at the top and bottom. You can either drive the weft yarns around a bit to fill the place, or weave a few more rows to fill the area.

Tucking the ends into the back of a colorful doodle weaving, made with a cardboard loom

Step 7: Now it is time to complete the again. First, make guaranteed all the tails are looped by means of the last warp yarns at the ends. Then, flip your weaving about and just begin weaving the tails again via some of the warp or weft threads. You can either use the taped conclusion, or use a boring pencil to pull up a loop slightly, then tuck the tail below.

Tucking the ends into the back of a colorful doodle weaving, made with a cardboard loom

The back of a colorful doodle weaving with the ends tucked into the warp and weft

When all the tails are tucked in (you could have to use masking tape from time to time if there is nowhere to tuck something), snip them to about an inch or so.

Finished doodle weaving on a stick

Step 8: Trim the base, add a wire hanger, and you are carried out! I hope you enjoy your weaving and are pretty proud of it. I enjoy mine so a great deal and just cannot wait around to make more!

xo, Bar

– – – – – – – – – – – – – – – – – – – –

Did you like this put up? Below are some a lot more innovative tips employing fibers!

Weaving with kids using a cardboard loom.

Weaving with Kids

Rainbow Weaving with Koolaid Dyed Yarn

Rainbow Weaving with Koolaid Dyed Yarn

Making God's Eyes with Sticks

Producing God’s Eyes with Sticks

Leave a Reply